Character Art Exchange

Characteristics of Ultrafine Mill

1. The grinding roll of the ultrafine mill crusher is equipped with replaceable wear-resistant lining board. The wear-resistant lining board is made of domestic advanced wear-resistant materials. It has the advantages of long service life, easy damage and convenient maintenance. Continuous service life can be more than one year. When the wear is serious, the cover can be replaced by removing it. Small maintenance and low cost are incomparable to any other type of crusher in China.

2. The ultrafine mill crusher is equipped with safety protection device. When an accidental metal iron piece enters the crushing chamber, the protection device acts and the iron leakage equipment works normally.

3. The roll gap of abrasive roll body of ultrafine mill crusher can be adjusted arbitrarily between 1 mm and 20 mm. After adjusting the roll gap according to the requirement of crushing particle size, the crushing particle size can be controlled reliably, and all of them are discharged from below the crushing cavity with ideal particle size.

4. The structure is simple and reasonable, the operation cost is low, the operation is stable, the efficiency is energy-saving, the crushing efficiency is high, and the discharging granularity is adjustable.

5. The ultrafine mill crusher is the working principle of low-speed and high-pressure roll-to-roll extrusion. The material falls vertically into the crushing chamber from the upper part of the crusher. Under the strong pressure produced between the two rollers, most of the material has become powdery, and a large number of cracks have been produced in the interior of the remaining small part of the granular material. In the further grinding process, the grinding energy consumption can be greatly reduced and the output can be increased.

You must be logged in to comment.

Register
Log in
Username

Password:

forgot your password?

or OpenID:
or Log in with Google