It is very important to do the lubrication work of the bearing of the sand making machine. Otherwise, it will affect the operation of the whole production line, and it will not be able to give good play to the ideal condition of the bearing. However, to do a good job of lubrication, the first thing to do is to choose a suitable grease. When choosing the grease of the Sand Making Equipment, we should choose according to the following characteristics.
1. Anti-rust performance: The grease used in the bearing must have anti-rust effect, and the preservative cannot be dissolved in water. Grease should have good adhesion and form an oil film on the surface of the steel.
2, mechanical stability: oil will become soft during machining, resulting in leakage. In normal operation, grease will be trapped inside the bearing by the bearing housing. If the mechanical stability of the grease is insufficient, during the operation, the structure of the soap of the grease will mechanically disintegrate, causing the grease to be destroyed, thereby losing the lubricating effect.
3. Oil seal: Oil seal is a necessary barrier to protect bearings and lubricants from external pollution. During the operation of the bearing, no matter whether debris or moisture can penetrate into the bearing to prevent damage. Proper installation and maintenance is an important factor in the life of the bearing. At the same time, attention must be paid to the cleanliness of the bearings, the correctness of the choice of bearings and the selection of appropriate installation and maintenance tools. In addition, the bearings must be protected from contamination and moisture and ensure proper installation and lubrication.
4. Mixed grease: Never mix incompatible oils. If two kinds of incompatible oils are mixed, the consistency will usually become soft, and the bearing may be damaged due to the easy loss of grease. If you do not know which grease the bearing originally used, you must completely remove the old grease inside and outside the bearing before adding new grease.
Recommend our company's cobblestone Silica Sand Crusher here.
SBM mechanical production sand making machine combines the advantages of domestic and foreign equipment to design a multi-functional new sand making machine with fine crushing and sand making. The sieve plate adopts a unique spring retracting mechanism, which is simple, convenient, reasonable, safe and reliable.
It is very important to do the lubrication work of the bearing of the sand making machine. Otherwise, it will affect the operation of the whole production line, and it will not be able to give good play to the ideal condition of the bearing. However, to do a good job of lubrication, the first thing to do is to choose a suitable grease. When choosing the grease of the Sand Making Equipment, we should choose according to the following characteristics.
1. Anti-rust performance: The grease used in the bearing must have anti-rust effect, and the preservative cannot be dissolved in water. Grease should have good adhesion and form an oil film on the surface of the steel.
2, mechanical stability: oil will become soft during machining, resulting in leakage. In normal operation, grease will be trapped inside the bearing by the bearing housing. If the mechanical stability of the grease is insufficient, during the operation, the structure of the soap of the grease will mechanically disintegrate, causing the grease to be destroyed, thereby losing the lubricating effect.
3. Oil seal: Oil seal is a necessary barrier to protect bearings and lubricants from external pollution. During the operation of the bearing, no matter whether debris or moisture can penetrate into the bearing to prevent damage. Proper installation and maintenance is an important factor in the life of the bearing. At the same time, attention must be paid to the cleanliness of the bearings, the correctness of the choice of bearings and the selection of appropriate installation and maintenance tools. In addition, the bearings must be protected from contamination and moisture and ensure proper installation and lubrication.
4. Mixed grease: Never mix incompatible oils. If two kinds of incompatible oils are mixed, the consistency will usually become soft, and the bearing may be damaged due to the easy loss of grease. If you do not know which grease the bearing originally used, you must completely remove the old grease inside and outside the bearing before adding new grease.
Recommend our company's cobblestone Silica Sand Crusher here.
SBM mechanical production sand making machine combines the advantages of domestic and foreign equipment to design a multi-functional new sand making machine with fine crushing and sand making. The sieve plate adopts a unique spring retracting mechanism, which is simple, convenient, reasonable, safe and reliable.