What is the grinding roller assembly of the Raymond machine, that is, the device that is hung on the plum blossom frame, and is also the core device of the Raymond mill. If the Raymond machine fails in the old age, the fault in this part is the most. How can we make the life of the grinding roller assembly longer and save our own production costs? There are two kinds of grinding roller assemblies: one is to add butter, the other is to add oil. The grinding roller assembly of Raymond machine is added with butter. This is an old type. It needs to add oil once a day. The purpose of refueling is not to lubricate the bearing. It is to let the asbestos packing inside hold the bearing without dust, so that the bearing inside the assembly is not easy to break, and if it is short of oil, it will damage the bearing. The total achievement of the oil can't be achieved. The design adopts a new design. The seal is more rigorous. It only takes one week to add the oil and the service life is longer.
There are several advantages to the oil assembly:
1. No oil leakage, no need to add fuel in one shift, only a small amount of oil is required for three days to one week.
2, the degree of sealing is high, the production process is not easy to dust in the assembly, thus extending the service life of the bearing.
3. In the production process, according to the degree of wear of the bearing of the assembly, the bearing clearance can be adjusted to ensure that the upper and lower bearings are concentric, and the bearing can be used continuously for more than ten months.
4. The new grinding roller assembly prolongs the maintenance cycle, reduces the maintenance strength, reduces the production cost, improves the production efficiency, and brings considerable economic benefits to the user. The price of choosing the oil assembly is also much more expensive than the old one, but it can save you a lot of oil money in one year, and it also saves the labor maintenance cost, so the benefits are very considerable.
What is the grinding roller assembly of the Raymond machine, that is, the device that is hung on the plum blossom frame, and is also the core device of the Raymond mill. If the Raymond machine fails in the old age, the fault in this part is the most. How can we make the life of the grinding roller assembly longer and save our own production costs? There are two kinds of grinding roller assemblies: one is to add butter, the other is to add oil. The grinding roller assembly of Raymond machine is added with butter. This is an old type. It needs to add oil once a day. The purpose of refueling is not to lubricate the bearing. It is to let the asbestos packing inside hold the bearing without dust, so that the bearing inside the assembly is not easy to break, and if it is short of oil, it will damage the bearing. The total achievement of the oil can't be achieved. The design adopts a new design. The seal is more rigorous. It only takes one week to add the oil and the service life is longer.
There are several advantages to the oil assembly:
1. No oil leakage, no need to add fuel in one shift, only a small amount of oil is required for three days to one week.
2, the degree of sealing is high, the production process is not easy to dust in the assembly, thus extending the service life of the bearing.
3. In the production process, according to the degree of wear of the bearing of the assembly, the bearing clearance can be adjusted to ensure that the upper and lower bearings are concentric, and the bearing can be used continuously for more than ten months.
4. The new grinding roller assembly prolongs the maintenance cycle, reduces the maintenance strength, reduces the production cost, improves the production efficiency, and brings considerable economic benefits to the user. The price of choosing the oil assembly is also much more expensive than the old one, but it can save you a lot of oil money in one year, and it also saves the labor maintenance cost, so the benefits are very considerable.