The crusher looks like a simple mechanical device, and it will encounter many problems in production. No matter the size or the problem, it is normal for the mechanical equipment. After all, the unfinished mechanical equipment is also produced by human beings. Simple, about the base break of Crusher Plant, I think this is a big problem, customers should not underestimate all the problems that occur on the mechanical equipment. The following small series introduces the treatment method of the broken base of the crusher, and hope that the majority of customers pay attention to this problem.
The vibration energy generated by the normal operation of the crusher is insufficient to cause the substrate to break. Mostly due to the unstable factors in the operation of the crusher: if the crushing chamber of the crusher is seriously blocked, the mechanical vibration will be generated, which will have a great influence on the substrate. After many similar vibrations, it is likely to A base fracture occurs. The crusher jaws are not original or have been modified, which will also cause the jaw crusher to be unevenly loaded during operation, twisting and oscillating, causing the SBM Crusher Equipment base to break. The jaw crusher has undergone a base fracture, which has been subjected to simple welding or welding defects, so that the machine may cause the base to break during normal operation.
The solution to the fracture of the crusher base:
Generally, simple maintenance is a welding repair, but the effect of this repair is not ideal. In preparation for overhaul, the entire base of the jaw crusher can be welded with steel plates. The high-strength anchor bolts with larger diameters are embedded in the concrete foundation, so that even if the crusher blockage operation produces strong vibration, it will not adversely affect the base of the jaw crusher. If the jaw crusher is prone to abnormal vibration, consider adjusting the jaws. Due to the serious bearing wear, the jaw crusher base can be broken to replace the bearing. The jaw crusher can be replaced if it is too loose or too tight. Replace the more rugged base to prevent similar failures from happening again.
The crusher looks like a simple mechanical device, and it will encounter many problems in production. No matter the size or the problem, it is normal for the mechanical equipment. After all, the unfinished mechanical equipment is also produced by human beings. Simple, about the base break of Crusher Plant, I think this is a big problem, customers should not underestimate all the problems that occur on the mechanical equipment. The following small series introduces the treatment method of the broken base of the crusher, and hope that the majority of customers pay attention to this problem.
The vibration energy generated by the normal operation of the crusher is insufficient to cause the substrate to break. Mostly due to the unstable factors in the operation of the crusher: if the crushing chamber of the crusher is seriously blocked, the mechanical vibration will be generated, which will have a great influence on the substrate. After many similar vibrations, it is likely to A base fracture occurs. The crusher jaws are not original or have been modified, which will also cause the jaw crusher to be unevenly loaded during operation, twisting and oscillating, causing the SBM Crusher Equipment base to break. The jaw crusher has undergone a base fracture, which has been subjected to simple welding or welding defects, so that the machine may cause the base to break during normal operation.
The solution to the fracture of the crusher base:
Generally, simple maintenance is a welding repair, but the effect of this repair is not ideal. In preparation for overhaul, the entire base of the jaw crusher can be welded with steel plates. The high-strength anchor bolts with larger diameters are embedded in the concrete foundation, so that even if the crusher blockage operation produces strong vibration, it will not adversely affect the base of the jaw crusher. If the jaw crusher is prone to abnormal vibration, consider adjusting the jaws. Due to the serious bearing wear, the jaw crusher base can be broken to replace the bearing. The jaw crusher can be replaced if it is too loose or too tight. Replace the more rugged base to prevent similar failures from happening again.