The gypsum powder is made of natural Vertical Mill Characteristics gypsum ore taking up about 60 billion ton of the total amount. China is a big country which makes a large amount of chemical gypsum. As the national economy develops rapidly and the Chinese mining machinery industry focuses on the environment protection, the desulfurization process of the power plant has become the necessary link operated by the power plant. There is a lot of flue gas desulfurization gypsum produced by the power plant as well as lemon citric acid, fluorine gypsum and other chemistry gypsum. In the industrial powder process, to process gypsum powder has been one of the most important industries. As a member of the five gel materials, the gypsum powder plays a key role in the national economy and has been widely used in the fields of construction material, industrial molds, art model, chemical engineering, agriculture and food industry.
To make full use of the Vertical Mill Dust Removal Design natural resources and develop the gypsum industry is an important task for the construction of the recycling economy and also a new focus for the inventors. The Raymond mill made by our company adopts the advanced technology and is improved based on the traditional Raymond mill manufacturing mode. The new type of Raymond mill is quite suitable to process the gypsum powder. It has many features of high working efficiency, low power consumption, small occupation area and little investment.
Working Principle of Raymond Mill:
The grinder mill crushes and grinds the bulk raw material into the required feeding granularity, after that bucket elevator lifts the material into the storage bin, and then electric vibrating feeder transports it evenly into the grinding chamber where the material is scooped up by shovel blade and grinded between grinder roller and grinder ring, and then the blower blows the air into the grinding chamber from shunt plate and blows the grinded powder into the analysis chamber, the powder is concentrated by rotating analysis impeller that is driven by the speed motor with transmission gear, after the concentration, the large granular material drops back into the grinding chamber and is grinded again, and while the qualified fine powder enters into cyclone powder collector following the air flow. When the qualified powder separates with air, it is discharged into the final product from the discharging port. In the working process of the host machine, the shovel blade plays the important role. It is in the lower end of the grinder roller and they rotate at the same time when the material is scooped up and thrown into the space between grinder roller and grinder ring thus it shapes litter layer which grinds the material with the pressure force produced by rotating grinder roller so as to achieve the goal of making powder.
To make full use of the Vertical Mill Dust Removal Design natural resources and develop the gypsum industry is an important task for the construction of the recycling economy and also a new focus for the inventors. The Raymond mill made by our company adopts the advanced technology and is improved based on the traditional Raymond mill manufacturing mode. The new type of Raymond mill is quite suitable to process the gypsum powder. It has many features of high working efficiency, low power consumption, small occupation area and little investment.
Working Principle of Raymond Mill:
The grinder mill crushes and grinds the bulk raw material into the required feeding granularity, after that bucket elevator lifts the material into the storage bin, and then electric vibrating feeder transports it evenly into the grinding chamber where the material is scooped up by shovel blade and grinded between grinder roller and grinder ring, and then the blower blows the air into the grinding chamber from shunt plate and blows the grinded powder into the analysis chamber, the powder is concentrated by rotating analysis impeller that is driven by the speed motor with transmission gear, after the concentration, the large granular material drops back into the grinding chamber and is grinded again, and while the qualified fine powder enters into cyclone powder collector following the air flow. When the qualified powder separates with air, it is discharged into the final product from the discharging port. In the working process of the host machine, the shovel blade plays the important role. It is in the lower end of the grinder roller and they rotate at the same time when the material is scooped up and thrown into the space between grinder roller and grinder ring thus it shapes litter layer which grinds the material with the pressure force produced by rotating grinder roller so as to achieve the goal of making powder.