Many customers will be overwhelmed by some problems in the production after purchasing the sand making machine. As a professional sand making machine manufacturer, we provide users with high-quality sand making machines, and also explain some of them to the users. The problems encountered in production, these problems are indeed the most important needs of users.
First of all, in the sand production line, we generally install the following equipment to form a production line, namely jaw crusher, counter-type sand making machine and sand washing machine. In the production line, the counter-type sand making machine sometimes has some reasons. Or the situation suddenly and violently vibrating, Hongyi Machinery separately for the reasons and solutions for this phenomenon to give you a brief introduction.
The counter-type sand making machine is in the sand production line, on the concrete foundation, although it will vibrate when the material is broken, but the vibration is within a certain normal range and the vibration frequency of the machine is also within a certain range. Sometimes in production, this kind of vibration will suddenly increase. The reasons for this phenomenon are as follows: the base and bolts of the counter-type sand making machine fixed on the concrete foundation are loose due to long-term use; the sand making machine is installed. At the beginning, the parallel error of the transmission shaft and the concrete horizontal plane is greater than 5 mm; the metal material and other high-hardness ore materials appear in the crushing cavity of the counter-attack sand making machine, so that the impact force of the machine is increased; the internal resistance of the machine crushing chamber Abrasive parts are severely worn, resulting in increased machine vibration.
The above are four possible reasons for the increased vibration of the counter-type sand making machine, and the solutions to these problems are mainly as follows, which are analyzed and briefly introduced below. When the counter-type sand making machine is installed, we will remind the user to ensure that the concrete foundation level, the machine drive shaft and the horizontal plane are parallel, and the error is less than 5 mm even if it is not parallel, but some users do not pay attention to this during installation. One point, which leads to severe vibration of the machine, the solution is to install according to the requirements; and the bolts for fixing the crusher equipment will loosen after long-term use, the user should replace and re-cast in time; the internal resistance of the crushing chamber of the counter-type sand making machine The parts are easily worn and the user should check and replace them regularly; the counter-type sand making machine is different from the impact type sand making machine, and the hardness of the material that can be broken is relatively small. Therefore, the high-hardness material must be prevented from entering the crushing chamber, and the user can be in front of the machine. Install a separator to achieve the purpose of removing high hardness materials.
Many customers will be overwhelmed by some problems in the production after purchasing the sand making machine. As a professional sand making machine manufacturer, we provide users with high-quality sand making machines, and also explain some of them to the users. The problems encountered in production, these problems are indeed the most important needs of users.
First of all, in the sand production line, we generally install the following equipment to form a production line, namely jaw crusher, counter-type sand making machine and sand washing machine. In the production line, the counter-type sand making machine sometimes has some reasons. Or the situation suddenly and violently vibrating, Hongyi Machinery separately for the reasons and solutions for this phenomenon to give you a brief introduction.
The counter-type sand making machine is in the sand production line, on the concrete foundation, although it will vibrate when the material is broken, but the vibration is within a certain normal range and the vibration frequency of the machine is also within a certain range. Sometimes in production, this kind of vibration will suddenly increase. The reasons for this phenomenon are as follows: the base and bolts of the counter-type sand making machine fixed on the concrete foundation are loose due to long-term use; the sand making machine is installed. At the beginning, the parallel error of the transmission shaft and the concrete horizontal plane is greater than 5 mm; the metal material and other high-hardness ore materials appear in the crushing cavity of the counter-attack sand making machine, so that the impact force of the machine is increased; the internal resistance of the machine crushing chamber Abrasive parts are severely worn, resulting in increased machine vibration.
The above are four possible reasons for the increased vibration of the counter-type sand making machine, and the solutions to these problems are mainly as follows, which are analyzed and briefly introduced below. When the counter-type sand making machine is installed, we will remind the user to ensure that the concrete foundation level, the machine drive shaft and the horizontal plane are parallel, and the error is less than 5 mm even if it is not parallel, but some users do not pay attention to this during installation. One point, which leads to severe vibration of the machine, the solution is to install according to the requirements; and the bolts for fixing the crusher equipment will loosen after long-term use, the user should replace and re-cast in time; the internal resistance of the crushing chamber of the counter-type sand making machine The parts are easily worn and the user should check and replace them regularly; the counter-type sand making machine is different from the impact type sand making machine, and the hardness of the material that can be broken is relatively small. Therefore, the high-hardness material must be prevented from entering the crushing chamber, and the user can be in front of the machine. Install a separator to achieve the purpose of removing high hardness materials.