List Member Galleries
Is the sand machine a little leaky?
sand making machine
is used for a long time, there will be some problems, such as the sanding machine hammer wear, the parts are damaged, and the equipment needs lubrication. Then there is a small amount of oil leakage in the sand making machine equipment, will it affect its normal work? How to deal with it? Below we have a detailed solution from Henan Shisheng Mine senior sand making machine manufacturer.
How to solve the oil leakage of the sand making machine or the crusher? Although the machine oil leakage is a common thing, the safety hazard caused by oil leakage is something that every one of us should know. Frequent maintenance of the sand making machine equipment can greatly reduce the chance of oil leakage from the sand making machine. So what are the points that need to be repaired? Here we introduce you one by one:
a. After repairing the sand making machine, when reassembling the upper crushing roller and the shell coupling, the round nut and the coupling bolt should strictly control the tightening torque. When tightening the clamp coupling bolt, it is necessary to pay attention to In order of sequence, the diagonal bolts should be tightened first, then the intermediate bolts should be tightened, and the gap between the couplings on both sides of the facets should be uniform.
b. Maintenance and repair of
sand making machine
If you need to open the cover of the main and auxiliary transmission gearboxes, you must replace the rubber sealing strip and evenly apply a layer of sealing glue on the static sealing surface before reinstalling to prevent oil leakage on the sealing surface. , oil leakage.
c. The bearings of the upper and lower crushing roller translation linkages of the sand making machine are greased and lubricated. The design requires the use of No. 2 or No. 3 calcium-based grease. And the oil cup cover should be tightened once a week for normal work to inject grease.
d. The final sand making equipment is widely used in metallurgy, construction, hydropower, transportation, chemical industry, building materials industry, suitable for crushing all kinds of ore and rock with hard and medium hardness.
You must be logged in to comment.
Art, Writing, etc.
forgot your password?
Log in with Google