Sand making machine is characterized by simple structure and wide application scope by using the high-speed rotating hammer head in crushing chamber to crush materials. Sand making machine has a large yield, and the particle size below 3mm is 80%. The hammer and lining board are adjusted in two directions to control the granularity at any time. It is convenient to change the hammer and save time and labor.
The fixing operation of sand making crusher: it should be fixed on the cement foundation. If the working place is changed frequently, sand making crusher and motor should be installed on the machine seat made of Angle iron. If the power of sand making crusher is driven by the diesel engine, the power of the two should be matched, that is, the power of the diesel engine is slightly greater than that of sand making crusher. And make both the belt wheel groove consistent, the outer end surface of the belt wheel should be on the same plane.
The fixing operation of sand making crusher: it should be fixed on the cement foundation. If the working place is changed frequently, sand making crusher and motor should be installed on the machine seat made of Angle iron. If the power of sand making crusher is driven by the diesel engine, the power of the two should be matched, that is, the power of the diesel engine is slightly greater than that of sand making crusher. And make both the belt wheel groove consistent, the outer end surface of the belt wheel should be on the same plane.