Why is the mobile crusher widely used as a mobile chassis for a variety of reasons, such as a lot of wear resistance, strong climbing ability, etc. First, understand the advantages of the triangular track used in the crawler Construction Waste Crusher, by setting the bottom of the triangular track The two load-bearing wheels can well withstand the pressure of the entire triangular track. At the same time, the track at the position of the two load-bearing wheels directly contacts the ground to complete the walking process, and has the characteristics of good passability, simple structure and convenient use. In view of the design of the chassis of the construction waste crusher, our company has a construction waste crusher with a tire-type chassis. The price is relatively high in cost performance compared with the crawler type. In view of the disfigurement of the construction waste crushing site, there are steel wires and glass slag. In the long run, the tire-type construction waste crusher is inevitably inferior to the crawler-type construction waste crusher. The load-bearing capacity of the tire-type frame is generally determined by the air pressure. The load-bearing weight will have certain requirements, and the construction waste crusher carried by the tires is also good. It is difficult to adapt to various environments. The stone crushing and sand production line is not on the top of the environment. The demolition site is filled with the fall after the war, so from this point of view, the wheeled Quarry crusher is certainly There is a price advantage, and the long-term analysis of the crawler type has an advantage. Therefore, the tracked mobile crusher has better off-road performance and can quickly adapt to any terrain. The wheel is only suitable for certain terrains. The more complex the terrain is, the more outstanding it can be.
Construction waste crushers with rubber crawlers are mostly medium-sized and small construction waste grinders with a production capacity of more than 100 tons. They are constructed of construction machinery, with high carrying capacity, high traction, low noise, good driving performance and built-in Low-speed and high-torque motor travel reducer with high pass performance. The construction waste crusher with steel track is mostly medium and large construction waste crushing equipment. The steel track roller and guide wheel adopt deep groove ball bearing and add butter at one time. Lubrication, maintenance-free maintenance and maintenance. The spring tensioning mechanism adjusts the color screw, has high reliability, and has double-end sealing structure to ensure that the lubricating oil seal does not leak, and can prevent muddy water from entering the wheel cavity.
If the construction waste pulverizer finds jitter when handling cement concrete, first check whether the tooth plate is normal. Generally, the slight abnormal noise and jitter of the construction waste pulverizer will cause the tooth plate displacement and other components to collide, and some parts will be abnormal due to friction. When the heat is generated, the wear of the tooth plate will also be accelerated, and the abnormal vibration of the tooth plate will cause the friction of the moving plate, the impact sound inside the device, and the like. In fact, the jitter of the tooth plate is a very easy problem to be solved. It can be overcome by taking certain measures in the production. First stop the inspection. After finding the cause, use a hammer and other tools to strike the fixed ferrule on the side wall and tighten the lining. Plate; another way is to firmly connect the bolts or replace the new bolts to ensure the stability of the tooth plate.
Why is the mobile crusher widely used as a mobile chassis for a variety of reasons, such as a lot of wear resistance, strong climbing ability, etc. First, understand the advantages of the triangular track used in the crawler Construction Waste Crusher, by setting the bottom of the triangular track The two load-bearing wheels can well withstand the pressure of the entire triangular track. At the same time, the track at the position of the two load-bearing wheels directly contacts the ground to complete the walking process, and has the characteristics of good passability, simple structure and convenient use. In view of the design of the chassis of the construction waste crusher, our company has a construction waste crusher with a tire-type chassis. The price is relatively high in cost performance compared with the crawler type. In view of the disfigurement of the construction waste crushing site, there are steel wires and glass slag. In the long run, the tire-type construction waste crusher is inevitably inferior to the crawler-type construction waste crusher. The load-bearing capacity of the tire-type frame is generally determined by the air pressure. The load-bearing weight will have certain requirements, and the construction waste crusher carried by the tires is also good. It is difficult to adapt to various environments. The stone crushing and sand production line is not on the top of the environment. The demolition site is filled with the fall after the war, so from this point of view, the wheeled Quarry crusher is certainly There is a price advantage, and the long-term analysis of the crawler type has an advantage. Therefore, the tracked mobile crusher has better off-road performance and can quickly adapt to any terrain. The wheel is only suitable for certain terrains. The more complex the terrain is, the more outstanding it can be.
Construction waste crushers with rubber crawlers are mostly medium-sized and small construction waste grinders with a production capacity of more than 100 tons. They are constructed of construction machinery, with high carrying capacity, high traction, low noise, good driving performance and built-in Low-speed and high-torque motor travel reducer with high pass performance. The construction waste crusher with steel track is mostly medium and large construction waste crushing equipment. The steel track roller and guide wheel adopt deep groove ball bearing and add butter at one time. Lubrication, maintenance-free maintenance and maintenance. The spring tensioning mechanism adjusts the color screw, has high reliability, and has double-end sealing structure to ensure that the lubricating oil seal does not leak, and can prevent muddy water from entering the wheel cavity.
If the construction waste pulverizer finds jitter when handling cement concrete, first check whether the tooth plate is normal. Generally, the slight abnormal noise and jitter of the construction waste pulverizer will cause the tooth plate displacement and other components to collide, and some parts will be abnormal due to friction. When the heat is generated, the wear of the tooth plate will also be accelerated, and the abnormal vibration of the tooth plate will cause the friction of the moving plate, the impact sound inside the device, and the like. In fact, the jitter of the tooth plate is a very easy problem to be solved. It can be overcome by taking certain measures in the production. First stop the inspection. After finding the cause, use a hammer and other tools to strike the fixed ferrule on the side wall and tighten the lining. Plate; another way is to firmly connect the bolts or replace the new bolts to ensure the stability of the tooth plate.